You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

Buttweld Reducing Tee Short Radius Pipe, Stainless Steel Butt weld Reducing Tee, ANSI B16.9 Reducing Tee Long Radius Pipe, Manufacturer Of ASME / ANSI B16.9 BButt weld Unequal Tee Pipe, Carbon Steel Butt weld Reducing Tee, Nickel Alloys Butt weld Reducing Tee Supplier in India.

Butt weld Reducing Tee Pipe

ANSI/ASME B16.9 Butt weld Reducing Tee Long Radius Pipe, Competitive Price of Butt weld Reducing Tee, High Quality Alloy Steel Butt weld Reducing Tee Pipe, ANSI/ASME B16.9 Butt weld Reducing Tee Pipe, Duplex Steel Butt weld Reducing Tee Pipe, ANSI B16.9 Butt weld Reducing Tee Pipe, ASME B16.9 Buttweld Reducing Tee Pipe Seamless Dealer.

Inderjit Forgings is a distinguished supplier of Reducing Tee Pipe Fittings, which replaces its larger demand in the soft tempers. This can result if Stainless Steel Reducing Tee Pipe Fittings is held in a temperature range 450 to 850°C for periods of several minutes, depending on the temperature and subsequently exposed to aggressive corrosive environments. Carbon Steel Reducing Tee Pipe Fittings has excellent strength and toughness at cryogenic temperatures. Alloy Steel Reducing Tee Pipe Fittings have good welding characteristics. Super Duplex Steel Reducing Tee Pipe Fittings offers an excellent choice for various applications and industries such as food & drink processing, petrochemical and construction.

Inconel Butt weld Reducing Tee Pipe, ANSI B16.9 Buttweld Reducing Tee Pipe Exporter, ASME B16.9 Buttweld Reducing Tee Pipe Manufacturer in India, Hastelloy Buttweld Reducing Tee Pipe, Long Radius Reducing Tee Pipe, Reducing Tee Pipe, Monel Reducing Tee Pipe, SS Butt weld Reducing Tee Pipe Stockist in Mumbai, India.

Inconel Alloy Reducing Tee Pipe Fittings is subject to pitting and crevice corrosion in warm chloride environments and to stress corrosion cracking above about 60 Degree C. Residual stresses, in both longitudinal and transverse directions for Monel Alloy Reducing Tee Pipe Fittings, were measured for welds obtained at two different rotational speeds, showing that the region subjected to higher tensile residual stress when using the higher speed. The Chrome in Hastelloy Alloy Reducing Tee Pipe Fittings combines with the carbon of the heat affected zone and precipitates as chromium carbide at the grain boundaries. Weld annealing in Nickel Alloy Reducing Tee Pipe Fittings is only necessary in applications where stress loads are excessive. We present our Titanium Alloy Reducing Tee Pipe Fittings in an appropriate manner which is accepted by our respected clients.

Buttweld Reducing Tee Pipe Specification

Dimension Standard : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Size : 1/2” TO 36” (SEAMLESS UPTO 24”) (WELDED 8” TO 36” )
Thickness : Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS
Type : Seamless / Welded / Fabricated
Origin Indian Origin, European Origin, Japanese Origin
Testing and Documents : Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, Destructive Test Report, Non Destructive Test Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports
Testing and Documents : Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, Destructive Test Report, Non Destructive Test Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports
Packing : Packed in Wooden Boxes, Bubble wraps, Steel Strips Bundled, or as per Customers Requests

Manufacturing Standards

ASME : ANSI B16.9, ANSI B16.28, MSS-SP-43
DIN : DIN2605, DIN2615, DIN2616, DIN2617, DIN28011
EN : EN10253-1, EN10253-2
ASTM A403 – ASME SA403 : Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
ASME B16.9 : Factory-Made Wrought Fittings Buttwelding
ASME B16.25 : Buttwelding Ends
ASME B16.28 : Wrought Steel Short Radius Elbows and Buttwelding Returns
MSS SP-43 : Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications

Butt weld Reducing Tee Material & Grades
Stainless Steel Reducing Tee Pipe
ASTM A182 F 304, 304L, 304H, 309, 310, 310S, 316, 316L, 317, 317L, 321, 321H, 347, 347H, 446, 904L
Carbon Steel Reducing Tee Pipe
ASTM A234, ASME SA234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
Alloy Steel Reducing Tee Pipe
ASTM A234, ASME SA234 WP1 / WP5 / WP9 / WP11 / WP22 / WP91
Duplex Steel Reducing Tee Pipe
ASTM A815, ASME SA815 UNS S31803, S32205, 2205
Super Duplex Reducing Tee Pipe
ASTM A815, ASME SA815 UNS S31803, S32205, 2205
High Nickel Alloy Reducing Tee Pipe
ASTM B336, ASME SB336, Nickel 200 (UNS No. No2200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade 2 & 5), Cupro-Nickel 70/30, Cupro-Nickel 90/10.
Low Temperature Carbon Steel Reducing Tee Pipe
ASTM A420 WPL3, A420 WPL6

Other Types of Buttweld Reducing Tee Pipe

Duplex Steel 2205 Reducing Tee Pipe Exporter
Copper Nickel Butt weld Reducing Tee Pipe Dealer
Super Duplex 2507 Butt weld Reducing Tee
ANSI B16.9 Buttweld Reducing Tee Pipe Welded Pipe

Titanium Alloy Reducing Tee Long Radius Pipe
Monel Buttweld Short Radius Reducing Tee Pipe
Nickel Alloy Butt weld Unequal Tee Pipe
ASTM A403 SS Reducing Tee Pipe Butt weld

Pipe Fittings Buttweld Reducing Tee Pipe Application Industries

Our Global Presence
  • India
  • United States
  • Saudi Arabia
  • Kuwait
  • Singapore
  • Malaysia
  • UAE
  • Germany
  • Italy
  • China
  • UK
  • Canada
  • Iran
  • Thailand
  • South Korea
  • Turkey
  • Morocco
  • Costa Rica
  • Kazakhstan
  • Philippines
  • Egypt
  • Japan
  • Russia
  • Vietnam
  • Australia
  • Qatar
  • South Africa
  • Portugal
  • Oman
  • Jordan
  • Spain
  • Hong Kong
  • Netherlands
  • Indonesia
  • Mexico
  • Brazil
  • France
  • Taiwan
  • Nigeria
  • Bangladesh
  • Iraq
  • Ukraine
  • Poland
  • Romania
  • Cyprus
  • Angola
  • Colombia
  • Norway
  • Chile
  • Tobago
  • Greece
  • Czechia
  • Belgium
  • Sri Lanka
  • Myanmar
  • Venezuela