Inderjit Forgings is a prominent stockist firm of SS 321 Pipe Flanges, which proves to be resistant to oxidation, corrosion, and durability. Stainless Steel 321 Slip On Flanges has good resistance to oxidation in intermittent service up to 870 Degree C and in continuous service to 925 Degree C. Stainless Steel 321 Weld Neck Flanges is also used in mining and water filtration systems and in the dyeing industry. Being extremely tough and ductile, Stainless Steel 321 Socket Weld Flanges are readily fabricated by old working. Continuous use of Stainless Steel 321 Forged Flanges in the 800 Degree F – 1580 Degree F range is not recommended if subsequent aqueous corrosion resistance is important. To solution anneal, cool rapidly in air or water for Stainless Steel 321 Orifice Flanges should be done from about 1850 Degree F to 2050 Degree F.
The controlled analysis of Stainless Steel 321 Blind Flanges enables it to retain sufficient ductility in conditions to be roll or brake formed into aircraft, architectural and particularly rail car structural components. In such applications, Stainless Steel 321 Spectacle Blind Flanges will last longer, providing you with extra years of life and usage. High hardness and strength in Stainless Steel 321 Reducing Flanges are achieved through cold working. Just like the standard alloy, Stainless Steel 321 Flat Flanges can get marked up by fingerprints and grease, develop discoloration, and eventually rust.
| STANDARD | WERKSTOFF NR. | UNS | JIS | EN |
| SS 321 | 1.4541 | S32100 | SUS 321 | X6CrNiTi18-10 |
Specification : ASTM A182 / ASME SA182
Dimension Standard : ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.
Size : 1/2" (15 NB) to 48" (1200NB)
Pressure Class / Rating : 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
Standard : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.
Flange Face Type : Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
| ASTM A182 F321 Stainless Steel Flanges – Manufacturing Standards / Types & Pressure Class : | |
|---|---|
| ASME/ANSI B 16.5 | Welding Neck Flange, Slip on Flange, Blind Flange, High Hub Blind Flange, Socket Weld Flange, Lap Joint Flange, Threaded Flange, Ring Type Joint Flange |
| PRESSURE CLASS | 150, 300, 400, 600, 900, 1500, 2500 |
| ASME/ANSI B 16.47 | Welding Neck Flange, Blind Flange [Series A & B] |
| PRESSURE CLASS | 75, 150, 300, 400, 600, 900 |
| ASME/ANSI B 16.36 | Welding Neck Flange, Slip on Flange, Threaded Flange |
| PRESSURE CLASS | 300, 400, 600, 900, 1500, 2500 |
| BS 4504 SEC 3.1 | Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange, Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange |
| PRESSURE CLASS | PN 2.5 TO PN 40 |
| BS 4504[PART 1] | Welding Neck Flange, Hubbed Slip-On Hubbed Threaded, Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange |
| PRESSURE CLASS | PN 2.5 TO PN 400 |
| BS 1560 BOSS | Welding Neck Flange, Socket Welding Flange, Slip-On Flange, Blind Flange, Screwed Boss Flange, Lapped Flange |
| PRESSURE CLASS | 150, 300, 400, 600, 900, 1500, 2500 |
| BS10 | Welding Neck Flange, Plate Slip-On Flange, Screwed Boss Flange, Slip-On Boss Flange, Blind Flange |
| TABLE | D, E, F, H |
| DIN FLANGES | DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673 |
| PRESSURE CLASS | PN 6 TO PN 100 |
| Grade | C | Mn | Si | P | S | Cr | N | Ni | Ti |
| SS 321 | 0.08 max | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 17.00 - 19.00 | 0.10 max | 9.00 - 12.00 | 5(C+N) – 0.70 max |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1457 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
ASTM A182 Stainless Steel 321 Tongue & Groove Flanges
Stainless Steel ASTM A182 321 Flanges in India
Stainless Steel 321 Spade (Paddle Blanks/Blinds)
SS UNS S32100 Flanges distributor
Stainless Steel DIN 1.4541 Flanges
Steel 321 SWRF Flanges Traders
SS 321 Screwed Flanges Dealers in India
SS 321 Raised Face Flanges Supplier in India
ASME SA182 321 Stainless Steel Flange Outlet
AISI 321 Stainless Steel Reducing Flanges
ASME SA182 SS 321 Expander Flanges stock
Stainless Steel 321 Square Flanges
321 Stainless Steel Loose Flanges
ASTM A182 321 SS High Hub Blind Flanges
321 Stainless Steel Nipoflange Price List
ASME SA182 SS 321 Weldo Flange Stockholder
SS 321 Flangeolet Manufacturer in Mumbai
321 Stainless Steel Male & Female Flanges
Stainless Steel 321 Ring Spacers (Paddle Spacers)
India
United States
Saudi Arabia
Kuwait
Singapore
Malaysia
UAE
Germany
Italy
China
UK
Canada
Iran
Thailand
South Korea
Turkey
Morocco
Costa Rica
Kazakhstan
Philippines
Egypt
Japan
Russia
Vietnam
Australia
Qatar
South Africa
Portugal
Oman
Jordan
Spain
Hong Kong
Netherlands
Indonesia
Mexico
Brazil
France
Taiwan
Nigeria
Bangladesh
Iraq
Ukraine
Poland
Romania
Cyprus
Angola
Colombia
Norway
Chile
Tobago
Greece
Czechia
Belgium
Sri Lanka
Myanmar
Venezuela
